Information pertaining to Beta Releases of Lumorphix, including downloadable binaries and metadata are provided below.
Documentation
An overview of the Lumorphix Beta Releases, i.e. software and hardware requirements, release dates etc. is available here. For instructions related to evaluating a Beta Release, see here.
Beta Releases
The following table provides a short summary of the Beta Releases and their corresponding Target Hardware.
| Beta Release ID | Target Hardware | Non-volatile Storage |
|---|---|---|
| 02.001 | SiPeed Tang Nano 9k | Yes |
| 01.001 | Digilent Arty-S7 | No |
For each individual Beta Release, there are multiple sub-variants available, each of which have been built with different configurations and/or FPGA targets. This allows the user to evaluate the full suite of functionality that is offered by Lumorphix. Each Beta Release section listed below details an overview of the build configuration of the associated, downloadable firmware archive (or binary – web link in column ‘FPGA‘). Note that for table cells that contain more than one value, each value is the specification for a specific Core (see here or here for more information), with Core #1 the top-left-most value.
NOTE: All Lumorphix Beta Releases have been both time (15 minute usage limit) and performance-throttled.
Beta Release ID: 02.001
Hardware Target: Tang Nano 9K
Hardware specific information for this Beta Release is available here. To load a Beta Release binary onto its corresponding target hardware, fulfill the software requirements detailed here and then follow the instructions available here.
Binaries
| FPGA | Freq (MHz) | Cores | Stack (kB) | Heap (kB) | I/O | XBar (Sync) | XBar (Data) | Fabric Bus |
|---|---|---|---|---|---|---|---|---|
| GW1NR-9-C6/I5 | 64 | 1 | 16 | 1024 | 12 | n/a | n/a | no |
| GW1NR-9-C6/I5 | 64 | 2 | 8,8 | 512,512 | 4,0 | yes | yes | yes1 |
- PIN5 – PIN16 reflect the state of Fabric Bus bits 1 – 12. ↩︎
Hardware Topology
See here for more information regarding the behavior of the User Button.
Beta Release ID: 01.001
Hardware Target: ARTY-S7
Hardware specific information for this Beta Release is available here. To load a Beta Release binary onto its corresponding target hardware, fulfill the software requirements detailed here and then follow the instructions available here.
Binaries
| FPGA | Freq (MHz) | Cores | Stack (kB) | Heap (kB) | I/O | XBar (Sync) | XBar (Data) | Fabric Bus |
|---|---|---|---|---|---|---|---|---|
| s25 | 200 | 1 | 8 | 96 | 8 | n/a | n/a | no |
| s25 | 180 | 2 | 8 | 64, 64 | 16,16 | yes | yes | no |
| s25 | 180 | 4 | 8 | 32, 32, 16, 16 | 6,5 4,3 | yes | yes | no,yes, yea,no |
| s25 | 170 | 8 | 4 | 16, 16, 16, 16, 16, 16, 16, 16 | 3,3, 0,0, 0,0, 0,0 | yes | no | no |
| s50 | 200 | 1 | 8 | 96 | 16 | n/a | n/a | no |
| s50 | 180 | 2 | 8 | 96, 96 | 16,16 | yes | yes | no |
| s50 | 180 | 4 | 8 | 96, 64, 32, 16 | 12,9, 6,3 | yes | yes | no,yes, yea,no |
| s50 | 170 | 8 | 8 | 64, 32, 32, 16, 16, 16, 16, 16 | 9,6, 6,0, 3,3, 3,3 | yes | yes | no,yes, no,no, no,no, no,yes |
Hardware Topology
Mailing List
See here to subscribe to email notifications regarding Beta Releases.
Other
An overview of the Lumorphix IP is available here.